Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Update the Navigation Software on the Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

To update the navigation software on the Mercedes C-Class, open the glove compartment on the passenger side and remove the navigation control module from its rear. Once extracted, connect it to a computer and download the updates from the websites shown in the video, following the same procedure.

Once installed, you can disconnect the module from the computer and insert it back into its housing behind the glove compartment. By turning on the instrument cluster, you will notice the navigation has been updated.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to activate the navigator on the on-board computer of the Mercedes W 204
How to activate the navigator on the on-board computer of the Mercedes W 204
Mercedes Classe C (2007-2013 / W204) .. on the on-board computer of the Mercedes C-Class model W204, produced from 2007 to 2013. To activate the navigator, we need to turn on the vehicle's.. …
How to Update the Navigation System in the Mercedes-Benz C-Class
How to Update the Navigation System in the Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. navigation system in the Mercedes-Benz C-Class. This tutorial also applies to other models from the German manufacturer equipped with the same.. …
How to Update the Garmin Map Pilot in the Mercedes-Benz C-Class W205
How to Update the Garmin Map Pilot in the Mercedes-Benz C-Class W205
Mercedes Classe C (2014-2021 / W205) .. Garmin Map Pilot system in the Mercedes-Benz C-Class W205. First, get in the vehicle and turn on the ignition; then, download the update from the Mercedes.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos