Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the navigator on the on-board computer of the Mercedes W 204

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Onboard computer

Today we will explain how to activate the navigator on the on-board computer of the Mercedes C-Class model W204, produced from 2007 to 2013. To activate the navigator, we need to turn on the vehicle's instrument panel and at the same time turn on the on-board computer, press the two buttons located on the lower dashboard near the gear shift. By holding down the buttons for a few seconds, we will access the navigator on the display, which will allow us to set the starting point and destination to reach our destination in peace. If the navigator has trouble detecting the position, it is necessary to update the software.

Posted on 22 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the Headlight Washer System on Mercedes C-Class
How to Activate the Headlight Washer System on Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) Here are the instructions to activate the headlight washer system on the Mercedes C-Class. First, get in the vehicle and turn on the instrument clust…
How to set the time on the Mercedes C-Class
How to set the time on the Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) In these short and simple steps, we will see how to change the time on the on-board computer of the Mercedes C-Class. First of all, we get into the c…
How to activate the headlights washer of the Mercedes C-Class
How to activate the headlights washer of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) Today, we will see the instructions that will allow us to activate the headlight washing mechanism of the Mercedes C-Class, in simple steps. First of…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos