Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb in the Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

To fix the left low beam error and replace the front headlight bulb, first lift the vehicle on a jack to remove the left front wheel and take off the fender liner. After that, disconnect the negative terminal of the battery.

Next, remove the headlight cover, turn the bulb to the left to lift it out, and disconnect the wire by pushing it down. Once the old bulb is removed, detach the connector from the old bulb and attach it to the new bulb.

At this point, reconnect the wire to the bulb, reinstall the bulb in its housing by turning it slightly to the right to secure it. Now, reinstall the headlight cover, reconnect the battery, reattach the fender liner, and put the wheel back on. Lower the vehicle off the jack and start it to check that everything is working correctly.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb of the Mercedes E-Class?
How to Replace the Headlight Bulb of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the headlight bulb of the Mercedes E-Class, lift the vehicle so that the wheel on the side of the bulb to be replaced is off the ground: therefore,.. …
How to Replace the Headlight Bulb on a Mercedes E-Class
How to Replace the Headlight Bulb on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Replacing the headlight bulb on a Mercedes E-Class is a simple and quick task you can do yourself. To replace the bulb, remove the cover of the light.. …
How to Replace the Interior Light Bulb in a Mercedes E-Class?
How to Replace the Interior Light Bulb in a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. replace the interior light bulb in a Mercedes E-Class, use a tool like a screwdriver to pry the light fixture from its housing. Once it is removed, disconnect.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos