Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulb in a Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Interior dome light bulb

See other generations:
Video tutorial

To replace the interior light bulb in a Mercedes E-Class, use a tool like a screwdriver to pry the light fixture from its housing. Once it is removed, disconnect the connectors inside: this will allow you to take out the bulb from its housing and replace it with a new one. After the new bulb is installed, reconnect the light fixture by inserting it back into its housing.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

Removing the Rear Interior Light Fixture on Mercedes E-Class W211
Removing the Rear Interior Light Fixture on Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the rear interior light fixture on a Mercedes E-Class W211, fourth generation. First, get inside the vehicle and obtain a very thin plastic trim tool;.. …
How to replace the front headlight bulb of the Mercedes E-Class W211
How to replace the front headlight bulb of the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the front turn signal bulb of your Mercedes E-Class W211 is really simple and to complete the operation correctly, you just need to follow the procedure.. …
How to replace the headlight bulb of the Mercedes E-Class
How to replace the headlight bulb of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. on the right front headlight of a Mercedes E-Class model W 211. To replace the bulb, we need to open the front hood and then disconnect the connector.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos