Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Collision Prevention Assist in the Mercedes-Benz B-Class

Model: Mercedes Classe B W246, MK 2 - Years 2011-2019
Part: Checks and maintenance

In today's video, learn how to remove the Collision Prevention Assist system in the Mercedes-Benz B-Class, specifically how to extract the sensor located at the front of the car. The device is positioned behind the manufacturer's logo, at the centre of the front. Start by removing the Mercedes logo, taking care to disconnect the component from the power supply. Once done, you can proceed with the adjustment or replacement of the device. After reassembling, you can reconfigure it by connecting the PC to your vehicle.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset Service Light on Mercedes-Benz B-Class
Reset Service Light on Mercedes-Benz B-Class
Mercedes Classe B (2011-2019 / W246, MK 2) .. maintenance on a second-generation Mercedes-Benz B-Class. First, enter the cabin and turn on the vehicle's ignition; then, press the "ok" button.. …
How to Replace the Air Filter of the Air Conditioning in a Mercedes B-Class
How to Replace the Air Filter of the Air Conditioning in a Mercedes B-Class
Mercedes Classe B (2011-2019 / W246, MK 2) .. starting, enter the cabin of your Mercedes B-Class. Begin by unfastening the clips that secure the cover of the air conditioning air filter, then.. …
How to reset the service light on a 2016 Mercedes-Benz B-Class.
How to reset the service light on a 2016 Mercedes-Benz B-Class.
Mercedes Classe B (2011-2019 / W246, MK 2) .. reset the service light on a 2016 Mercedes-Benz Class B vehicle are simple and quick to perform independently. The first step is to turn on the instrument.. …

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the Mercedes B-Class yaw sensor located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos