Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Starter motor

See other generations:
Video tutorial

Let’s briefly go through the guide on how to remove and replace the starter motor on a Mercedes C-Class, following the instructions below. First, open the hood of your car and start by disconnecting both battery terminals; then raise the vehicle to access the starter motor, as shown in the video.

At this point, use a socket wrench with an extension to remove the bolts of the starter motor, disconnecting the wiring to remove it; all that’s left is to install the new original starter motor!


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How do you replace the starter motor of the Mercedes C-Class?
How do you replace the starter motor of the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. to replace the starter motor of the Mercedes C-Class, you need to open the hood so that you can access the components inside the engine compartment:.. …
How to Remove the Starter Motor from a Mercedes C-Class
How to Remove the Starter Motor from a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. you begin, open the hood of your Mercedes C-Class. Start by removing all the hoses and intake manifolds located above the starter motor, loosening.. …
How to Replace the Starter Motor on the Mercedes C-Class 250
How to Replace the Starter Motor on the Mercedes C-Class 250
Mercedes Classe C (2007-2013 / W204) .. and replace the starter motor on the Mercedes C-Class 250. First, lift the vehicle and start disconnecting the air conditioning line to access the starter.. …

How to Enter the Unlock Code for the Radio in the Nissan Micra?

In this tutorial, you will see how to enter the unlock code for the radio in the Nissan Micra, a very simple operation to perform in case of memory loss after replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. First, turn on the instrument panel, then repeatedly press the "1" button until you reach the first digit of the code. Follow the same logic to enter the remaining 3 digits using the "2", "3", and "4" buttons, and confirm the entry with the up arrow button.

Watch the video!


by ScegliAuto

More videos