Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor from a Mercedes C-Class

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Starter motor

Before you begin, open the hood of your Mercedes C-Class. Start by removing all the hoses and intake manifolds located above the starter motor, loosening the respective mounting bolts. Next, remove the bolts that secure the starter motor in place. This will free the starter motor itself. Proceed to disconnect the electrical connector. At this point, you can remove the starter motor, completing the disassembly. To install the new starter motor, follow these steps in reverse, and you will have completed the replacement.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on the Mercedes C-Class 250
How to Replace the Starter Motor on the Mercedes C-Class 250
Mercedes Classe C (2007-2013 / W204) .. and replace the starter motor on the Mercedes C-Class 250. First, lift the vehicle and start disconnecting the air conditioning line to access the starter.. …
How to Replace the Starter Motor on a Mercedes C-Class
How to Replace the Starter Motor on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) ..nd replace the starter motor on a Mercedes C-Class, following the instructions below. First, open the hood of your car and start by disconnecting b.. …
Replacement of the starter motor for the Mercedes C-Class 180
Replacement of the starter motor for the Mercedes C-Class 180
Mercedes Classe C (1993-2000 / W202) .. and replace the starter motor of the Mercedes C-Class 180. To access the starter motor, it will be necessary to lift the vehicle, possibly using jack.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos