Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Remove the ignition motor on Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Starter motor
Operation: Remove the ignition motor on Mercedes C-Class

Removing the starter motor on a Mercedes C-Class? Let's see how it is disassembled in the guide. We disconnect the cables from the car battery power supply. We remove the engine soundproofing panel with attached cables. We disassemble the air filter, then, disconnect the terminals of the starter motor power supply with a pliers or screwdriver depending on the pressure of the tabs. We unscrew the locking pins of the starter motor with a socket wrench. After removing the damaged motor, mount the new piece with the connection of the power supply cables and the attached screws.


Posted on 13 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the starter motor located in the Mercedes C-Class W204? Read Answer
    • Classe C 2007-2013 - Where is the starter located on Mercedes C180? Read Answer
    • Classe C 2000-2007 - Where is the starter on the Mercedes C-Class located? Read Answer
    • Classe C 2007-2013 - Where is the starter motor of the Mercedes C-Class W204? Read Answer
    • Classe C 2000-2007 - Where is the starter motor of the Mercedes C-Class W203 located? Read Answer
    • Classe C 2000-2007 - Position of the starter motor of the Mercedes C-Class? Read Answer
    • Classe C 2014-2021 - What is the position of the starter on the Mercedes c200? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos