Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on the Mercedes-Benz C-Class 200

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

The instructions in this guide will show you how to remove and replace the battery on the Mercedes-Benz C-Class 200. First, open the hood of the vehicle and disconnect both battery terminals (positive and negative); then, unscrew the mounting screws of the battery bracket to remove it from its compartment, as shown in the video.

At this point, replace and install the new battery of the correct type and with the same amperage; after connecting the battery, check that the engine starts correctly.


Posted on 26 May 2026 by ScegliAuto


Related tutorials

Guide to replacing the starter motor of the Mercedes C-Class 200
Guide to replacing the starter motor of the Mercedes C-Class 200
Mercedes Classe C (2007-2013 / W204) .. and replace the starter motor of the Mercedes C-Class 200. To access the starter motor, it is necessary to lift the vehicle; we then disconnect the pipes.. …
Replacement of the water pump for the Mercedes Classe C 200.
Replacement of the water pump for the Mercedes Classe C 200.
Mercedes Classe C (2007-2013 / W204) .. and replace the water pump of the Mercedes C-Class 200, with engine code OM651. First, let's lift the vehicle and start by removing the plastic cover.. …
Removing Injectors from Mercedes C-Class 200 CDI
Removing Injectors from Mercedes C-Class 200 CDI
Mercedes Classe C (2007-2013 / W204) .. steps to remove the injectors from a Mercedes C-Class 200 CDI. First, open the hood and disconnect the electrical connectors shown by gently pressing.. …

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the auxiliary battery of a Mercedes C-Class located? Read answer
    • Classe C 2000-2007 - Where is the secondary battery of the Mercedes Benz W203 located? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos