Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Injectors from Mercedes C-Class 200 CDI

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Fuel injectors

In this video tutorial, you will learn the main steps to remove the injectors from a Mercedes C-Class 200 CDI. First, open the hood and disconnect the electrical connectors shown by gently pressing on the tabs. Next, use a wrench to loosen the nuts on the injector connection pipes. At this point, remove the mounting bolts for the injectors (there are four in total) and extract them as shown in the video. Finally, replace them with new ones using original parts!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Injectors from a Mercedes C-Class CDI
How to Remove the Fuel Injectors from a Mercedes C-Class CDI
Mercedes Classe C (2007-2013 / W204) Discover how to remove and replace the fuel injectors of your Mercedes C-Class in this guide, following the instructions below. First, open the hood …
Removing the EGR Valve from the Mercedes C-Class CDI
Removing the EGR Valve from the Mercedes C-Class CDI
Mercedes Classe C (2000-2007 / W203) Follow these steps to remove and replace the EGR valve on the Mercedes C-Class CDI. First, open the hood and disconnect the rubber hose from the EGR …
Disassembly of the EGR valve of the Mercedes C-Class 2.2 CDI
Disassembly of the EGR valve of the Mercedes C-Class 2.2 CDI
Mercedes Classe C (2007-2013 / W204) The following steps will show us how to disassemble and eventually replace or clean the EGR valve of the Mercedes C-Class 2.2 CDI. First, we open the…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos