Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of the EGR valve of the Mercedes C-Class 2.2 CDI

Model: Mercedes Classe C W204 - Years 2007-2013
Part: EGR valve

The following steps will show us how to disassemble and eventually replace or clean the EGR valve of the Mercedes C-Class 2.2 CDI. First, we open the car's engine hood and start locating the EGR valve, which is found on the top part; we disconnect the pipes and the electrical connector, in order to remove it, as shown in the video. At this point, we clean the EGR valve with specific products, opting for replacement if damaged; we then reassemble the EGR valve correctly, following the video tutorial until the end!

Posted on 17 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe C (2000-2007 / W203) In this short and simple guide, we will see how to disassemble and clean (or replace) the EGR valve of the Mercedes C Class 2.0 CDI. First of all, op…
Mercedes Classe C (2000-2007 / W203) Follow these steps to remove and replace the EGR valve on the Mercedes C-Class CDI. First, open the hood and disconnect the rubber hose from the EGR …
Mercedes Classe C (2007-2013 / W204) Good morning, today we will focus on how to disassemble the EGR valve of our Mercedes C-Class. To begin, carefully open the front engine hood using t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos