Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mercedes C-Class?

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

In this tutorial, you will see how to replace the battery in a Mercedes C-Class, a very simple and quick operation. First, ensure that the key is not in the ignition for safety.

Then, open the trunk and remove the floor of the compartment. Next, loosen the negative terminal nut with a 10mm wrench, disconnect it, and repeat the process for the positive terminal.

Unscrew the mounting bracket bolt with a 13mm socket wrench. At this point, just remove the battery, place the replacement, and follow the reverse procedure.


Posted on 14 February 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Mercedes-Benz C-Class
How to Replace the Battery on a Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. and replace the battery on a Mercedes-Benz C-Class, following the instructions below. First, open the hood of your car and start by removing the plastic.. …
How to Replace the Key Fob Battery for the Mercedes C-Class?
How to Replace the Key Fob Battery for the Mercedes C-Class?
Mercedes Classe C (2014-2021 / W205) .. Replacing the key fob battery for the Mercedes C-Class, as shown in this tutorial, is an extremely simple and quick task. You will need a replacement.. …
How to Replace the Battery in the Mercedes C-Class
How to Replace the Battery in the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. disconnect the service battery in the Mercedes C-Class. Start by opening the trunk (as the unit is located at the rear of the car) and then remove the.. …

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the auxiliary battery of a Mercedes C-Class located? Read answer
    • Classe C 2000-2007 - Where is the secondary battery of the Mercedes Benz W203 located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos