|
Do it yourself
| |||
| ||||
How to Replace the Battery in a Mercedes C-Class
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
To replace the battery in a Mercedes C-Class, open the hood and locate the battery on the right side of the engine compartment. Disconnect the negative terminal first using a 10 mm wrench, then disconnect the positive terminal. Remove the mounting bracket at the base of the battery and lift the battery out of the housing. Insert the new battery with the same terminal orientation, secure the mounting bracket, and reconnect the terminals, positive first, negative last, tightening them well. Check for any movement and ensure the cables are secure, then close the hood and start the engine to verify the proper functioning of the electronic systems.
Posted on 14 August 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. and replace the battery on a Mercedes-Benz C-Class, following the instructions below. First, open the hood of your car and start by removing the plastic.. …
Mercedes Classe C
(2014-2021 /
W205)
.. and replace the battery on the Mercedes-Benz C-Class 200. First, open the hood of the vehicle and disconnect both battery terminals (positive and negative);.. …
Mercedes Classe C
(2007-2013 /
W204)
.. and replace the battery in a Mercedes-Benz C-Class. First, open the hood of your vehicle and start by removing the plastic cover located at the top.. …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |