Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the water pump for the Mercedes Classe C 200.

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Pump

See other generations:
Video tutorial

This short guide will illustrate how to disassemble and replace the water pump of the Mercedes C-Class 200, with engine code OM651. First, let's lift the vehicle and start by removing the plastic cover located under the engine, then proceed to drain the coolant.

Next, we will disconnect the serpentine belt by loosening the tensioner, as shown in the video.

At this point, we will unscrew the bolts of the water pump located on its sides, remove it, and replace it with the new one (or simply replace the gasket); then we will reassemble everything and top up with the new coolant.


Posted on 23 November 2025 by ScegliAuto


Related tutorials

Guide to replacing the water pump of the Mercedes Class C 1.8L
Guide to replacing the water pump of the Mercedes Class C 1.8L
Mercedes Classe C (2007-2013 / W204) The instructions in this guide will show us how to disassemble and replace the water pump of the Mercedes Class C, with a 1.8L engine code M271. To d…
How to Remove the Windshield Wiper Pump from the Mercedes C-Class
How to Remove the Windshield Wiper Pump from the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) This guide shows how to replace the windshield wiper pump on the Mercedes Benz C-Class. To perform this operation, you need to access the left front …
How to Replace the Water Pump on a Mercedes-Benz C-Class?
How to Replace the Water Pump on a Mercedes-Benz C-Class?
Mercedes Classe C (2000-2007 / W203) To replace the water pump on a Mercedes-Benz C-Class, open the hood to access the components in the engine compartment. Locate the water pump pulley …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos