Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the water pump of the Mercedes C-Class W202/W203/W204.

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Pump

See other generations:
Video tutorial

In this video, we will see how to replace the water pump on the Mercedes C-Class, on the W202/W203/W204 models: first, we will need to drain the coolant by opening the drain valve on the radiator, at the bottom right. Then we will remove the accessory belt with a 17mm wrench; we will lift the tensioner and lock it in place with a pin. Some models have an additional pulley that obstructs access to the pump, so we will need to remove it with a wrench.

The pump is secured with several hex screws: one screw in particular is difficult to reach, so we will need a socket screwdriver to remove it. Disconnect the connecting tube to the pump with a flat screwdriver, to press the release ring (but be careful not to damage the tube).

Clean the surface in contact with the engine and install the new pump, which we may have found on auto-doc. It by SKF brand with code VKPC 88855 at a price of 61.36 euros + 9.95 euros for shipping.

The gasket must also be new! Reassemble all the pieces in reverse order and fill the system with new coolant (using the type specified by Mercedes). Start the engine and check for any leaks.


Posted on 13 September 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (1993-2000 / W202) To replace the water pump on a Mercedes C-Class model W202, first open the hood. Then, using a 10 mm wrench, loosen the four bolts on the pulley and …
Mercedes Classe C (2007-2013 / W204) The process of removing the rear seats is performed on a Mercedes C-Class W204, but it is very similar to the Mercedes C-Class W203, so the available…
Mercedes Classe C (2000-2007 / W203) To replace the water pump on a Mercedes-Benz C-Class, open the hood to access the components in the engine compartment. Locate the water pump pulley …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos