Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the water pump of the Mercedes Class C 1.8L

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Pump

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the water pump of the Mercedes Class C, with a 1.8L engine code M271. To disassemble the timing belt, it is necessary to first remove the intake duct and the thermostat, draining the coolant into a container; then we disconnect the V-belt and unscrew the screws of the water pump pulley, as shown in the video.

At this point, we remove and replace the water pump with the new original one, following the video tutorial to the end!


Posted on 24 January 2026 by ScegliAuto


Related tutorials

Replacing the Water Pump on a Mercedes C-Class
Replacing the Water Pump on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) Today, follow the steps to remove and replace the water pump on a Mercedes C-Class, as outlined below. First, open the hood of the vehicle and begin …
How to Replace the Water Pump on a Mercedes-Benz C-Class?
How to Replace the Water Pump on a Mercedes-Benz C-Class?
Mercedes Classe C (2000-2007 / W203) To replace the water pump on a Mercedes-Benz C-Class, open the hood to access the components in the engine compartment. Locate the water pump pulley …
How to Remove the Windshield Wiper Pump from the Mercedes C-Class
How to Remove the Windshield Wiper Pump from the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) This guide shows how to replace the windshield wiper pump on the Mercedes Benz C-Class. To perform this operation, you need to access the left front …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos