Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How do you replace the thermostat on the Mercedes C-Class 220 cdi?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Thermostat
Operation: How do you replace the thermostat on the Mercedes C-Class 220 cdi?

The thermostat is a fundamental electrical component for the engine, or rather for its temperature, as if it does not work as it should, there is a risk of causing serious and serious damage, such as burning the head gasket, etc. We see in this video, how to proceed with its replacement: After opening the bonnet, remove the radiator cap and start by disassembling the rubber hose that goes from the latter to the engine, to then continue with the removal of all the pins blocking the thermostat to the right of the thruster. The work is completed by transferring, if desired with an electric pump, the coolant present in the aforementioned radiator, thus being able to remove the aforementioned thermostat from its housing and replace it with a new one.


Posted on 9 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos