Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Water Pump on a Mercedes W202

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Pump

See other generations:
Video tutorial

To replace the water pump on a Mercedes C-Class model W202, first open the hood. Then, using a 10 mm wrench, loosen the four bolts on the pulley and remove it. Next, remove the radiator cap, marked in red, and drain the fluid inside before replacing the cap. Unscrew the bolts on the pump housing to remove it, clean the housing, and install the new pump after lubricating it. Tighten the bolts and reattach the pulley.

Fill the radiator with fluid and close the hood.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (1993-2000 / W202) If you want to replace the cabin air filter on your Mercedes C-Class W202 (1993-2000) yourself but don't know how, don't worry because below you will…
Mercedes Classe C (1993-2000 / W202) In the mentioned car model, the Mercedes C-Class w202, if the warning light shown in this video related to passive safety devices and airbags comes o…
Mercedes Classe C (1993-2000 / W202) To change the time displayed on the instrument cluster of your Mercedes C-Class W202, just follow these simple steps. First, go inside the cabin and …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos