|
Do it yourself
| |||
| ||||
How to Reset the Air Conditioning on a Mercedes E-Class W211
Model: Mercedes Classe E
W211
- Years 2002-2009
To reset the air conditioning on a Mercedes E-Class W211, first turn the ignition key to position 1. From the panel, lower the air conditioning temperature to the lowest setting, which is Low (displayed in Fahrenheit in the video). Press the climate control button for six seconds. A blinking signal will appear. Press the "auto" button. It will display some messages until the screen shows "del," which stands for "delete." Next, press the red "up" button for the climate control, and horizontal lines will appear. Turn off the ignition. Turn it back on and press "auto," then return to "low" by pressing the blue "down" button. Press the climate control button again and then the "auto" button until you reach the "delete" message. Turn off the ignition and remove the key. Reinsert the key and turn it back on. Press "auto," and the temperature will automatically set to 72°F, which is approximately 22 degrees Celsius.
Updated on 19 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe E
(2002-2009 /
W211)
The procedure to reset the air conditioner on the Mercedes E-Class involves connecting a diagnostic tool to the vehicle's OBD port, located at the lo…
Mercedes Classe E
(2002-2009 /
W211)
This guide will show you how to reset the air conditioner of the Mercedes E-Class. To perform the reset, you need a diagnostic tool connected to the …
Mercedes Classe E
(2002-2009 /
W211)
To reset the air conditioner in a Mercedes E-Class, connect a diagnostic tool to the vehicle's OBD port, which is located on the lower left side of t…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.831
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |