|
Do it yourself
| |||
| ||||
How to Reset the SRS Light on a Mercedes
Model: Mercedes Classe E
W213
- Years 2016-2023
To reset the SRS light on a Mercedes E-Class, you can do it yourself without going to the dealership, where they would likely charge a significant amount for this service. However, you will need an OBDII scanner. The OBDII scanner typically costs around $100 on major e-commerce platforms, but it will be useful in many situations, making the expense worthwhile. By connecting it to the OBD port, which all recent vehicles have, using a specific cable, you can read all the error messages that the vehicle's control units may communicate. This includes the SRS (or airbag, as it is also known). This light can be on for many reasons, perhaps simply because you disconnected the negative terminal of the battery, or because you unplugged a connector and then restarted the vehicle without resetting. In any case, the OBDII scanner will inform you of all the errors present in the control unit, and you can clear them to turn off all the warning lights.
Updated on 23 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe E
(2002-2009 /
W211)
In this video, we will see one of the effective methods to reset and remove the airbag system (SRS) warning light of the Mercedes E-Class W211, follo…
Mercedes Classe E
(2002-2009 /
W211)
The SRS light that appears on the instrument cluster of the Mercedes E-Class indicates that there is a generic problem with the airbag system. You ca…
Mercedes Classe E
(2002-2009 /
W211)
This guide will show us how to reset the SRS light on the Mercedes E-Class; before resetting it, it is necessary to ensure that the entire airbag sys…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.099
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |