Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Hood of the Mercedes E-Class

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Body

In this brief guide, follow the instructions to open the hood of the Mercedes E-Class. First, open the front door on the driver's side and pull the small lever located next to the pedal area (the red one), as shown in the video; then, move to the front and unhook the small latch found in the center. At this point, lift the hood, which is held up by hydraulic struts; then lower and press down to close the hood again!

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Hood on a Mercedes E-Class?
How to Open the Hood on a Mercedes E-Class?
Mercedes Classe E (2016-2023 / W213) .. will see how to open the hood on a Mercedes E-Class, a very simple and quick operation that follows the standard procedure typical of any vehicle... …
How to open the front hood of the Mercedes E-Class
How to open the front hood of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. to open the front hood of the 2011 Mercedes E-Class. To perform this operation, we need to get into the vehicle and sit in the front seat on the driver's.. …
How do you top up the coolant on the Mercedes E-Class?
How do you top up the coolant on the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. In order to top up the coolant on the Mercedes E-Class, you need to open the hood to access the components located inside the engine compartment: on the.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos