Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill Coolant in a Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Antifreeze coolant

See other generations:
Video tutorial

To refill the coolant in a Mercedes E-Class, open the hood to access the components inside the engine compartment. On the right side, near the left low beam headlight, you will find the reservoir that contains the coolant.

You can now open this reservoir by unscrewing the corresponding cap and add the necessary amount of coolant. After refilling, close the reservoir and lower the hood.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Refill AdBlue in the Mercedes E-Class?
How to Refill AdBlue in the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To refill AdBlue in the Mercedes E-Class, open the trunk to lift the carpet at the base. Once the carpet is removed, you can access the.. …
How to Refill AdBlue on the Mercedes E-Class
How to Refill AdBlue on the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. let's see how to do this on the Mercedes E-Class. First, open the trunk and start removing the floor panel to access the cap of the AdBlue tank,.. …
How to Change Oil and Filters on the Mercedes E-Class W211
How to Change Oil and Filters on the Mercedes E-Class W211
Mercedes Classe E (2016-2023 / W213) Changing the oil and filters on the W211 requires removing the lower covers (8 mm bolts). Remove the drain plug (13 mm) and let the oil drain out. Th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos