Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Gears of the Automatic Gearbox on the Mercedes Axor

Model: Mercedes Mercedes Various
Part: Warning light – error code

In this video, you will learn how to reset the gears of the gearbox on the Mercedes Axor truck: on this model, clutch failure is a common issue, and the gear in manual mode can get stuck. You can do this if it is an occasional problem; if it continues to give issues, it is clear that there is a clutch problem that needs repairing. We need to circulate the air to the maximum; turn off the ignition and wait for the "N" to disappear from the display, then press the button located on the right of the lever. Turn the ignition back on and you will see messages appear in sequence where the "N" was. Start the engine and continue to hold the button while shifting through the gears starting from third and moving forward. Then shift down. Repeat the cycles several times. Turn off the engine and wait a couple of minutes. Everything should be back to normal.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Mercedes Various Resetting the maintenance light on a 2011 Mercedes Axor is a very simple operation, which can be done independently with the help of our video tutori…
Mercedes Mercedes Various In order to reset the automatic transmission of Mercedes vehicles, you need to connect a diagnostic tool to the OBD port of the vehicle, so that you …
Mercedes Mercedes Various In this video we see how to reset the automatic gearbox 722.9 Mercedes: we have to get in the car. We start by turning on the ignition without starti…

Other guides you may be interested in

    Frequently Asked Questions

    • Mercedes Vari - What does the SRS light on a Mercedes indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos