Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sl
    4. : Removing the squeegee gasket

Mercedes Sl - Video tutorial

Model: Mercedes Sl MK 5, R129 - Years 1989-2001
Part: Bodywork
Operation: Removing the squeegee gasket

The one present on the edge of the door immediately under the window is known as the glass scraper gasket as the function of allowing the glass to slide without letting water penetrate inside the door panel; to be able to disassemble it, open the door, unhook the rectangular seal flap fixed inside the door and then remove the rubber bar stuck along the edge of the door itself; the chromed molding that covers the edge of the door can also be released by levering it with a plastic stick, being careful not to deform it.


Posted on 31 August 2023 by ScegliAuto



Car windshield replacement
Mercedes Sl (1989-2001 / MK 5, R129) It can often happen, for various reasons, that you have to replace the windshield of your car. An operation that you can be able to do on your own wi
Disassembly of the wiper brushes motor
Mercedes Sl (1989-2001 / MK 5, R129) The wiper blade control unit is integrated with the blade arm itself and in order to be able to disassemble it it is necessary to remove all the elem
How do you replace the lift cylinders of the Mercedes SL convertible top?
Mercedes Sl (1989-2001 / MK 5, R129) In order to replace the lifting cylinders of the Mercedes SL soft top, you need to loosen the screws located in the upper part of the door pillar and

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos