Do it yourself
Frequently asked questions about cars and motorcycles

Where is the battery located in the Mercedes Vito van?

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

In this video, you will see where the battery is located in the Mercedes Vito van and how to proceed if you need to replace it, a very simple and quick operation. As shown, the battery is not located in the traditional engine compartment but is instead found inside the cabin, beneath the driver's seat.

To remove it, start by opening the left door, then remove both the side panel and the seat. Next, disconnect both terminals, starting with the negative, unscrew the fixing bolts, and extract the battery from its housing.

To fit the replacement, simply follow the reverse procedure.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

Mercedes Vito (2014-2024 / MK 3, W447) In this video, you can see where the fuse boxes are located in the Mercedes Vito van and the relevant diagrams to consult if you need to check the fu…
Mercedes Vito (2003-2013 / MK 2, W639) In this tutorial, we will see how to replace the battery of the remote control for the Mercedes Vito van, a very simple and quick operation. To do th…
Mercedes Vito (2003-2013 / MK 2, W639) In this tutorial, you can see how to set the time on a Mercedes Vito van, an extremely simple and quick operation, for example, after replacing the b…

Other guides you may be interested in

    Frequently Asked Questions

    • Vito 2014-2024 - Where is the Mercedes Vito auxiliary battery located? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos