Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Mercedes E-Class?

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Car stereo

To remove the radio from the Mercedes E-Class, insert the appropriate release keys into the holes located at the two lower corners of the unit. Once the keys are inserted, you can unlock the internal clips that secure the radio, allowing you to pull it out of its slot. After the radio is removed, disconnect the connectors located inside the unit. This will enable you to connect the new radio to the connectors, insert it into its housing, and secure it properly.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in a Mercedes E-Class?
How to Replace the Radio in a Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. To replace the radio in a Mercedes E-Class, you must first detach the panels located under the radio, starting with the one that surrounds.. …
How to Reset the Mercedes E-Class Radio
How to Reset the Mercedes E-Class Radio
Mercedes Classe E (2002-2009 / W211) .. To reset the radio in the Mercedes E-Class, open the trunk of the vehicle to access the interior of the cargo area. You will need to remove.. …
How to reset the radio of the Mercedes Classe A.
How to reset the radio of the Mercedes Classe A.
Mercedes Classe E (1995-2002 / W210) .. To reset the radio of the Mercedes E-Class, first you need to find the radio unlock code. The first step to perform the reset is to turn on.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos