Do it yourself
| ||||
|
Mercedes Classe C - Video tutorial
Model: Mercedes Classe C
W203
- Years 2000-2007 The engine warning light that appears on the instrument panel of the Mercedes C-Class indicates a general malfunction in the engine injection system. Therefore, there is no unique procedure to reset the light. It will be necessary to connect a diagnostic tool to the vehicle's OBD port, which is located at the bottom left of the steering column. This will allow you to check which errors are stored in the control unit and reset them properly. At this point, you can disconnect the diagnostic tool and start the engine, verifying that the warning light has been reset.
Posted on 15 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |