Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to reset the TPMS of the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Tires
Operation: How to reset the TPMS of the Mercedes C-Class

To reset the Tire Pressure Monitoring System (TPMS) on the Mercedes C-Class, you can follow the following steps: Turn on the car and make sure all tires are properly inflated to the recommended pressure. Look for the TPMS reset button. It is usually located in the center console or dashboard control area. It may be labeled with "TPMS" or a tire icon. Press and hold the TPMS reset button for a few seconds until a message appears on the display or you hear an audible signal confirming the start of the reset procedure. Release the TPMS reset button and wait for the system to complete the reset process. It may take a few minutes. During the reset process, you may notice the TPMS light flashing on the dashboard or a series of indications on the display showing the progress of the reset. Once the reset is complete, the TPMS light will turn off or the message on the display will indicate that the system has been successfully restored.


Posted on 2 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos