Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Centre Armrest of the Mercedes B-Class

Model: Mercedes Classe B MK 2, W246 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Accessory kit

See other generations:
Video tutorial

To perform this replacement, lift the upper flap of the armrest to unscrew and remove the bolts securing the lower inner part of the armrest. Also, remove any panels secured with pressure clips on the sides.

Next, remove the internal panel of the glove compartment, then proceed to remove the last bolts securing the entire structure of the glove compartment. Continue until you have removed the part to be replaced.

At this point, install the new piece and retrace the steps described in reverse for reassembly.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to disassemble the central armrest of the Mercedes B-Class
How to disassemble the central armrest of the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. disassemble the central armrest of the Mercedes Class B, in simple steps. First, we get into the car and start by removing the cover located behind the.. …
How to Replace the Airbag Control Unit of the Mercedes B-Class?
How to Replace the Airbag Control Unit of the Mercedes B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. the airbag control unit of the Mercedes B-Class, use a tool to pry off all the plastic covers located on the centre console of the car. Once these.. …
Disassembling the Centre Console or Tunnel of a Mercedes Class B
Disassembling the Centre Console or Tunnel of a Mercedes Class B
Mercedes Classe B (2005-2011 / MK 1, W245) .. the centre console or tunnel of a Mercedes Class B. First, get in the vehicle and start removing the cover located at the base of the gear lever;.. …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos