Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the unit settings on MG HS

Model: MG HS MK 1 - Years 2019-2026
Part: Onboard computer

In this video we see how to change the unit of measurement that is set on the TPMS, from Bar to PSI to kPa. From the multimedia screen we go to the main screen and press the "setup" button and then we have to press on the four sides of the screen in order to open a dialogue window where we can see different units of measurement, related to a large quantity of measurements. We choose the one we want to set, in this case PSI is chosen, which is pounds per square inch. From here we can also change the unit of measurement for temperature, or if we want to display trips in miles or kilometers, or in consumption in liters or gallons.

Posted on 26 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Units of Measurement on the MG HS
How to Change the Units of Measurement on the MG HS
MG HS (2019-2026 / MK 1) In this video, we will see how to change the units of measurement on the multimedia screen of the MG HS: go to "settings" and click on all four corne…
How to reset the service indicator on MG HS (and reset the settings)
How to reset the service indicator on MG HS (and reset the settings)
MG HS (2019-2026 / MK 1) Let's see how to reset the service light on an MG HS: turn on the instrument panel and use the right/left buttons to navigate to the settings menu, w…
How to Set the Time in the MG HS?
How to Set the Time in the MG HS?
MG HS (2019-2026 / MK 1) In this tutorial, you will see how to set the time in the MG HS, a very simple and quick operation to perform, for example, after disconnecting the b…

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos