Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Units of Measurement on the MG HS

Model: MG HS MK 1 - Years 2019-2026
Part: Onboard computer

In this video, we will see how to change the units of measurement on the multimedia screen of the MG HS: go to "settings" and click on all four corners of the screen; ensure you hear the confirmation sound for each corner. A menu will open on the right, and we will start with the temperature, where we can choose between degrees Celsius or Fahrenheit; by selecting from this menu, we will highlight our choice on both the multimedia screen and the display; the same will happen for kilometres or miles, which we will find further down; scroll down again and choose the unit of measurement for tyre pressure, between bar, PSI, and kPa. Finally, we can choose whether to display consumption in km/l, litres per 100 km, or miles per gallon. When finished, close the window and that's it.

Posted on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

MG HS (2019-2026 / MK 1) In this video we see how to change the unit of measurement that is set on the TPMS, from Bar to PSI to kPa. From the multimedia screen we go to the m…

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos