Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the inner panel of the rear hatch of the Mini Cooper

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Door trim panel

In this short guide, we will see the instructions that will allow us to disassemble and replace the rear tailgate panel of the Mini Cooper. First, open the rear tailgate and start unscrewing the six fixing screws of the rear tailgate panel; then lever on the sides to detach and remove it, as shown in the video. At this point, it will be possible to access the internal part and the lock of the rear tailgate; then reassemble and properly fix the rear tailgate panel, applying the reverse process!

Posted on 19 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to open the rear hatch from the inside of the Mini Cooper.
How to open the rear hatch from the inside of the Mini Cooper.
Mini (2001-2007 / R52, R50, R53) We will briefly see the instructions that will allow us to manually open the rear trunk hatch from inside the Mini Cooper in case of an emergency. Fi…
How to disassemble the tailgate panel in the Mini Cooper?
How to disassemble the tailgate panel in the Mini Cooper?
Mini (2001-2007 / R52, R50, R53) In this tutorial, we can see how to disassemble the tailgate panel in the Mini Cooper, an extremely simple and quick operation, to be carried out for…
How to Open a Stuck Boot Lid on a Mini Cooper
How to Open a Stuck Boot Lid on a Mini Cooper
Mini (2001-2007 / R52, R50, R53) In a Mini Cooper, the rear boot lid may get stuck, for example, due to a fault with the control button or the lock actuator. In these cases, it is st…

How to Remove the Centre Console on a Renault Kangoo

To remove the centre console on a Renault Kangoo, use a plastic lever to pry off the trim located at the bottom of the centre console. Remove the leather gaiter from the gear lever. After removing the gaiter, unscrew the securing screw located at the rear of the centre console (if present). Once this is done, pull the console away and disconnect any power cables. Finally, insert the new part into the centre console space and reassemble all components as they were removed.

Watch the video!


by ScegliAuto

More videos