Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Ignition Cylinder from Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013

In this video, you will see how to replace the ignition cylinder of the Audi A3. First, remove the side plastic cover where the fuses are located: take out the blue 1 Amp fuse. Next, disconnect the battery terminals. Now, connect the cables that run to the steering and remove the central part by pulling it towards you (the airbag). Disconnect the connector by removing it completely. Remove the two screws to take off the plastic cover of the ignition: disconnect the various control units and use a drill to break the seal of the ignition lock to remove it.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Dismantling the Ignition Barrel of the Audi A3
Guide to Dismantling the Ignition Barrel of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today, this guide shows the steps on how to dismantle and replace the ignition barrel of the Audi A3. First, get inside the vehicle and start by remo…
How to Replace the Ignition Cylinder on the Audi A3
How to Replace the Ignition Cylinder on the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today's main instructions will allow you to remove and replace the ignition cylinder and steering lock of the Audi A3. First, get inside the vehicle …
Replacing the Clutch Master Cylinder on the Audi A3 8P 1.9 TDI
Replacing the Clutch Master Cylinder on the Audi A3 8P 1.9 TDI
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial, you will see how to remove the master cylinder or clutch pump on the Audi A3 8P 1.9 TDI, as well as on the Volkswagen Golf 5. First…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos