Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Mini Cooper?

Model: Mini Mini F56, F55, F57, F54 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

On the instrument panel of the Mini Cooper, the Service light that is displayed can be reset by turning on the instrument panel and then holding down the button located on the right side. By doing this, you will be able to access the screen where the remaining kilometers until the next service will be indicated, along with the icon of the car on a bridge.

By holding down the button again for a few seconds, a loading bar will appear, which will disappear when the Service light is reset: you can then release the button and turn off the instrument panel by removing the ignition key.


Posted on 17 May 2025 by ScegliAuto


Related tutorials

Mini (2007-2014 / R57, R56, R55) From the Mini Cooper S instrument cluster, you can completely turn off the Service light by switching on the vehicle's ignition, allowing you to navi…
Mini (2007-2014 / R57, R56, R55) By turning on the Mini Cooper's instrument cluster, you can clear the service light displayed by navigating through the menu that appears on the disp…
Mini (2007-2014 / R57, R56, R55) Today, you will learn the procedure to reset the service light for the routine maintenance oil change on the Mini Cooper. First, get inside the vehic…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Adjusting the Handbrake on a Kia Sportage

Today, learn how to adjust the handbrake on a Kia Sportage (2016-2022). Start by opening the armrest and removing the bottom with a small flat screwdriver as shown in the video. Next, remove the inner panel on the handbrake side to access its adjustment nut. Once done, use a spanner to turn the nut clockwise to increase the handbrake tension, or alternatively, loosen the tension by turning the nut anti-clockwise. After adjusting the cable tension, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos