Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator on a Mini Cooper R56

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Service warning light

In this video, we see how to reset the service light of a Mini Cooper R56: turn on the instrument panel and press the BC button repeatedly on the instrument panel, near the speedometer, until the service menu is accessed. At this point, hold it down for 5/10 seconds until the reset option appears. Confirm the operation by pressing the "BC" button again until the message "reset in progress" or "reset successfully" appears. Turn off the instrument panel and turn it back on to verify that the light has disappeared. On some versions, the button to press may be located under the speedometer, and then the procedure remains essentially the same.

Posted on 7 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator light on the 2013 Mini Cooper R56
How to reset the service indicator light on the 2013 Mini Cooper R56
Mini (2007-2014 / R55, R57, R56) In order to successfully carry out the manual reset of the service light on your 2013 Mini Cooper R56, you must follow these simple steps. First of a…
Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R55, R57, R56) If you don't know where the OBD port of your Mini Cooper R56 is located, don't worry because thanks to the steps described in the following guide, yo…
How to reset the service indicator light on the Mini Cooper R56
How to reset the service indicator light on the Mini Cooper R56
Mini (2007-2014 / R55, R57, R56) In this new guide dedicated to all of you who own a Mini Cooper R56, we will explain how to correctly perform the manual reset of the service light o…

How to Replace a Headlight Bulb on a Ford Focus

How do you replace a rear headlight bulb on a Ford Focus? Let's see how to do it in this video. This operation is very simple to carry out. Open the boot and remove the plastic cover from the side trim. Unscrew the retaining screws of the lamp unit, then pull it out by hand from the car's bodywork. Disconnect the power connectors, taking care not to damage them. Once the rear light is removed, replace the damaged bulbs. After completing this operation, reassemble everything in reverse order. Finally, check that the lights are functioning correctly.

Watch the video!


by ScegliAuto

More videos