Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mini
  4. :
  5. Mini
  6. : Tire pressure warning light reset

Mini - Video tutorial

Model: Mini Mini R55, R56, R57 - Years 2007-2014
Part: -board computer
Operation: Tire pressure warning light reset

The reset of the tire pressure warning light is done manually using the button on the side of the left lever of the light switch. Press the button to scroll the menu until "SET / INFO" appears on the instrument panel display: at this point, hold down for a few seconds to enter the settings menu. Press the side button again until the "SERVICE-INFO" message is displayed and then the "RESET" option: then keep the button pressed until the reset is complete and check that the warning light goes off on the instrument panel.


Posted on 4 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Mini 2017-2023 - What does the DSG® warning light mean on the Mini Mini Countryman? Read Answer
    • Mini 2010-2016 - How to reset the service warning light on the Mini Countryman r60? Read Answer
    • Mini 2007-2014 - Why doesn't the Mini Countryman's navigator work? Read Answer
    • Mini 2014-2023 - What are the red warning lights on Mini Cooper? Read Answer
    • Mini 2017-2023 - How to reset the brake pad warning light on the Mini? Read Answer
    • Mini 2007-2014 - What do the warning lights on the Mini Cooper mean? Read Answer
    • Mini 2014-2023 - What does the exclamation mark light in the Mini Cooper mean? Read Answer
    • Mini 2014-2023 - What to do if the warning lights in the Mini Cooper go crazy? Read Answer
    • Mini 2014-2023 - How do I know what the warning lights on the dashboard of a Mini Cooper mean? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos