Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the fog light on Mini

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Fog lights

Is the Mini's fog light damaged? Let's see how it changes. Using a suitable screwdriver, unscrew the fastening screw of the bumper plastics and remove them. We remove the bumper. Once the bumper has been removed, unscrew the screws of the spotlight and extract it from it (disconnect the power cable). We mount the new piece with a new bulb attached (same size and voltage) in the bumper. We screw in all the clamping screws. We mount the front bumper of the car. We test the correct functioning of the spotlight with the operating levers present in the vehicle.

Posted on 30 June 2020 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Fog Lights on the Mini Cooper
How to Replace the Rear Fog Lights on the Mini Cooper
Mini (2007-2014 / R56, R57, R55) To replace the rear fog lights on the Mini Cooper, follow these steps: 1) Disconnect the battery. 2) Gently pry the red side tabs, being careful not …
How to replace the fog light on Mini
How to replace the fog light on Mini
Mini (2014-2023 / F57, F56, F55, F54) How to replace the rear fog light bulb? Let's see how the bulb is replaced from inside the Mini headlight. We unlock the plastic in the lower part of…
How to replace the fog light bulb on the Mini Cooper
How to replace the fog light bulb on the Mini Cooper
Mini (2010-2016 / Countryman1, R60) Intervening with a timely replacement of the fog lights is very important as it reduces any inconvenience and dangers when driving on days with a lot…

How to Remove the Window Regulator Motor from a Volkswagen Touareg

Learn how to remove the door motor from a Volkswagen Touareg. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the handle cover, then unscrew the screws inside with the screwdriver. Unscrew the remaining screws on the door panel and detach the retaining clips. Remove the door panel by hand, then use a screwdriver or power screwdriver to unscrew the fastening screws of the door actuator motor. Disconnect the various power terminals and replace it with a new one. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos