Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Renault Scenic

Model: Renault Scenic - Years 1996-2003
Part: Blower motor

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fan Resistor on a Renault Scenic
How to Replace the Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) .. How to replace the fan resistor on a Renault Scenic? Let's see how to carry out the disassembly. Remove.. …
How to Replace the Heating Fan Resistor on a Renault Scenic
How to Replace the Heating Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today, we will explain how to replace the heating fan resistor on a Renault Scenic. To perform this operation, remove the lower part of the dashboard…
Replacing the Cabin Fan Resistor on a Renault Scenic
Replacing the Cabin Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Replacing the fan resistor on a Renault Scenic? Start by removing the plastic cover above the dashboard (instrument cluster) using a lever. Unscrew t…

    Frequently Asked Questions

    • Scenic 2009-2015 - What to do if the fan does not work on Renault Scenic? Read answer
    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos