Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Blower motor

How to replace the fan resistor on a Renault Scenic? Let's see how to carry out the disassembly. Remove the plastic cover above the centre tunnel using a lever, then unscrew the cover with a screwdriver (if necessary, remove the glove compartment). Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct installation of the previously fitted parts and test their proper functioning.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you change the heating resistor in a Renault Scenic 2?
How do you change the heating resistor in a Renault Scenic 2?
Renault Scenic (2003-2009 / MK 2, Scenic 2) Changing the heating resistor of a Renault Scenic 2 is not that complicated, but it requires a bit of patience and some manual skill. The resistor is…
How to Replace the Fan Resistor on a Renault Scenic
How to Replace the Fan Resistor on a Renault Scenic
Renault Scenic (1996-2003 / ) .. How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly:.. …
Replacing the Cabin Fan Resistor on a Renault Scenic
Replacing the Cabin Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Replacing the fan resistor on a Renault Scenic? Start by removing the plastic cover above the dashboard (instrument cluster) using a lever. Unscrew t…

    Frequently Asked Questions

    • Scenic 2009-2015 - What to do if the fan does not work on Renault Scenic? Read answer
    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos