Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan Resistor on a Renault Scenic

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

See other generations:
Video tutorial

Replacing the fan resistor on a Renault Scenic? Start by removing the plastic cover above the dashboard (instrument cluster) using a lever. Unscrew the securing screws with a screwdriver.

Disconnect the large connector from the resistor, then pull it out from the dashboard. Insert a new fan resistor (connect the power connector).

Finally, refit the cover of the instrument cluster and tighten the screws. Check the correct installation of the previously mounted parts and test the fan operation (turn on the fan).


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) If the cabin fan speed does not change despite adjusting the speed, it means that the resistor controlling the fan speed is damaged: to carry out thi…
Replacement of the Cabin Heater Resistor on Renault Scenic 1
Renault Scenic (1996-2003 / ) In today's video, we will see the instructions on how to disassemble and replace the internal cabin heater resistor on a first-generation Renault Sce…
How to Replace the Fan Resistor on a Renault Scenic
How to Replace the Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) How to replace the fan resistor on a Renault Scenic? Let's see how to carry out the disassembly. Remove the plastic cover above the centre tunnel usi…

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos