Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Cabin Fan Resistor on a Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Blower motor

If the cabin fan speed does not change despite adjusting the speed, it means that the resistor controlling the fan speed is damaged: to carry out this repair, which is inexpensive, you will need to remove the dashboard to access the air duct and then the cabin fan housing; once the dashboard is removed, extract the complete fan motor to thoroughly clean both the fan and its housing; then replace the resistor and proceed in reverse for reassembly.

Updated on 20 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Renault Scenic (2003-2009 / MK 2, Scenic 2) Replacing the fan resistor on a Renault Scenic? Start by removing the plastic cover above the dashboard (instrument cluster) using a lever. Unscrew t…
Renault Scenic (1996-2003 / ) How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the…
Renault Scenic (2003-2009 / MK 2, Scenic 2) How to replace the fan resistor on a Renault Scenic? Let's see how to carry out the disassembly. Remove the plastic cover above the centre tunnel usi…

    Frequently Asked Questions

    • Scenic 2009-2015 - What to do if the fan does not work on Renault Scenic? Read answer
    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos