Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter on Mini r50?

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Cabin air filter

Let's see today how to replace the "cabin air" filter of the legendary Mini r50. The replacement procedure is very simple because the filter is housed in a convenient position for disassembly. The filter compartment is located just below the glove box on the front passenger side. Once the filter holder compartment has been identified, let's see in detail: - unhook the flaps of the compartment cover where the passenger compartment air filter is inserted - extract the old filter (pay attention to the direction in which it is inserted) - insert the new filter following the appropriate guide (you can see it in the video) - make sure you have inserted the new filter correctly and close the lid by re-hooking the pressure flaps.

Posted on 21 January 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin air filter of the Mini Cooper S
Replacement of the cabin air filter of the Mini Cooper S
Mini (2001-2007 / R52, R50, R53) In a few simple steps, we will see how to disassemble and replace the cabin air filter of the Mini Cooper S. First, we open the front passenger side …
Replacement of the cabin air filter of the Mini R50
Replacement of the cabin air filter of the Mini R50
Mini (2001-2007 / R52, R50, R53) In this video we can see how, in order to prevent dirt and debris from outside from entering the ventilation system of the Mini, a filter has been in…
How to Change the Cabin Air Filter in a Mini
Mini (2001-2007 / R52, R50, R53) How to change the filter located in the cabin of a Mini? Follow these steps: open the door and locate the filter housing under the dashboard (right s…

Other guides you may be interested in

Replacing the Timing Belt on a Land Rover Freelander

Prepare to replace the timing belt on a Land Rover Freelander: lift the bonnet, remove the engine soundproofing panel and the timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley until the correct tension is achieved on the belt (previously fitted). Finally, check the tensioner and the belt itself, and tighten all previously removed components with a socket wrench.

Watch the video!


by ScegliAuto

More videos