Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : How to open the front hood of the Ford Transit Custom

Ford Transit - Video tutorial

Model: Ford Transit MK 7 - Years 2006-2014
Part: Bodywork
Operation: How to open the front hood of the Ford Transit Custom

On many Ford vehicles, the opening of the front hood is not carried out through the classic lever located in the passenger compartment, at the bottom left on the driver's side, but the ignition key must be used to insert in a lock located in front of the vehicle. , usually under the manufacturer's coat of arms; the reason for this choice is not clear, but it can represent a difficulty in the event that the lock is jammed in some way, with the risk of breaking the key; you can therefore try to release the lock by inserting a long screwdriver through the grille of the front matte: once the first opening has been made, spray the unlocking spray on the lock so as to allow its subsequent activation using the key.


Posted on 30 September 2023 by ScegliAuto



How to fit seat covers on Ford Transit Custom
Ford Transit (2014-2023 / MK 8) Let's see how to fit the custom seat covers for the Ford Transit Custom. Of course, for this type of vehicle it is difficult to give a precise indica
Where is the Ford Transit Custom fuse box located
Ford Transit (2014-2023 / MK 8) There is not just one fuse box inside your Ford Transit Custom, but two. Below we will find out which is the exact position in which both boxes are l
How to replace the air filter in the Ford Transit Custom van?
Ford Transit (2014-2023 / MK 8) Replacing the air filter in the Ford Transit Custom van, as we can see in this tutorial, is an extremely simple and quick operation. First of all, ma

Other guides that may interest you

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos