Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the Mini Cooper?

Model: Mini Mini F57, F54, F56, F55 - Years 2014-2023
Part: Warning light – error code

In this tutorial we can see how to reset the service in the Mini Cooper. This simple and quick operation must be carried out only after having carried out all the maintenance work required. First we insert the key leaving it in the initial position. After that, we hold down the button on the right of the large central speedometer and, at the same time, turn the key to the first position. At this point, release the key when the word "SIA" appears, keep it pressed again until the word "RST" appears and press it a third time to complete the procedure.

Posted on 5 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a Mini Cooper
How to reset the service light on a Mini Cooper
Mini (2014-2023 / F57, F54, F56, F55) The service light reset on a Mini Cooper vehicle follows simple and quick steps to be carried out independently. To reset the service light related t…
How to reset the service light on the Mini Cooper S.
How to reset the service light on the Mini Cooper S.
Mini (2014-2023 / F57, F54, F56, F55) In today's guide we will see how to reset the oil change routine maintenance service light on a 2016 Mini Cooper S, fourth series. First we get insid…
How do you reset the Service light on the Mini Cooper?
How do you reset the Service light on the Mini Cooper?
Mini (2023-2026 / F66) To reset the Service light on the Mini Cooper, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slo…

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos