Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the Mini's glove compartment?

Model: Mini Mini R52, R53, R50 - Years 2001-2007
Part: Glove compartment

In order to replace the Mini's glove compartment, it will be necessary to open it by unscrewing the side screws located inside it. After the screws have been removed, the internal cover of the top part of the compartment must be lowered in order to disconnect the connector connected to the internal spotlight in the compartment. When the compartment is completely free, it will be possible to extract it from its housing and replace it with a new one. The new compartment must be properly connected and fixed with the two side screws.

Posted on 31 May 2023 by ScegliAuto

Video tutorial

Related tutorials

Placement of the Mini's fuse boxes
Placement of the Mini's fuse boxes
Mini (2007-2014 / R57, R55, R56) In case of malfunctioning of a component of the electrical system, one of the first checks to be carried out is that of the corresponding fuse. In th…
How to replace the air filter of the Mini Cooper R56
How to replace the air filter of the Mini Cooper R56
Mini (2007-2014 / R57, R55, R56) The engine air filter in your Mini Cooper R56 is a very important component and for this reason you must replace it periodically in order to preserve…
How to replace the rear headlight bulb of the Mini Cooper R50
How to replace the rear headlight bulb of the Mini Cooper R50
Mini (2001-2007 / R52, R53, R50) In the following guide dedicated to your Mini Cooper R50, we will discover the various steps you need to take to replace the rear headlight bulb inde…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos