Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the outside air temperature sensor of the Mini Cooper.

Model: Mini Mini R57, R55, R56 - Years 2007-2014

In this guide, we will see the steps that will allow us to disassemble and replace the external air temperature sensor of the Mini Cooper. First of all, we lift the car with the jack and remove the front right wheel by unscrewing the bolts; then we unscrew the fixing screws that we find under the front bumper, in order to remove the fender, as shown in the video. At this point, we find the air temperature sensor on the back; we disconnect the electrical connector and remove the sensor from the bumper, replacing it with the new original one, applying the reverse procedure for reassembly!

Posted on 23 June 2023 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the air temperature sensor of the Mini Cooper.
Guide to replacing the air temperature sensor of the Mini Cooper.
Mini (2014-2023 / F55, F54, F57, F56) Today's guide will show us the steps that will allow us to disassemble and replace the external air temperature sensor of the Mini Cooper. First, let…
How do you replace the lambda sensor of the Mini Cooper?
How do you replace the lambda sensor of the Mini Cooper?
Mini (2007-2014 / R57, R55, R56) To replace the lambda sensor of the Mini Cooper, you will need to open the hood in order to access the components in the engine compartment: once the…
Where is the oil pressure sensor located in the Mini Cooper?
Where is the oil pressure sensor located in the Mini Cooper?
Mini (2007-2014 / R57, R55, R56) In this video we can see where the oil pressure sensor is located in the Mini Cooper and how to proceed in case we need to replace it, a very simple …

Other guides you may be interested in

    Frequently Asked Questions

    • Mini 2010-2016 - Where is the inflation kit located on the Mini Countryman? Read answer

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos