Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Air Temperature Sensor on a Mini Cooper

Model: Mini Mini F56, F57, F54, F55 - Years 2014-2023

This guide will show you the steps to remove and replace the external air temperature sensor on a Mini Cooper. First, raise the vehicle and remove the left front wheel; then, remove the small plastic cover from the front wheel arch to access the external air temperature sensor, as shown in the video. At this point, disconnect the electrical connector of the sensor to remove it and replace it with the new one, as well as the original spare part; connect it and then check the external air temperature!

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Outside Air Temperature Sensor on the Mini Cooper
Replacing the Outside Air Temperature Sensor on the Mini Cooper
Mini (2007-2014 / R56, R55, R57) In this guide, you will see the steps that will allow you to dismantle and replace the outside air temperature sensor on the Mini Cooper. First, lift…
Guide to Replacing the Brake Pad Wear Sensor on Mini Cooper
Guide to Replacing the Brake Pad Wear Sensor on Mini Cooper
Mini (2014-2023 / F56, F57, F54, F55) The steps in this guide will show you how to remove and replace the front brake pad wear sensor on the Mini Cooper. First, lift the vehicle and start…
How do you replace the lambda sensor of the Mini Cooper?
How do you replace the lambda sensor of the Mini Cooper?
Mini (2007-2014 / R56, R55, R57) To replace the lambda sensor of the Mini Cooper, you will need to open the hood in order to access the components in the engine compartment: once the…

    Frequently Asked Questions

    • Mini 2007-2014 - How much coolant does a Mini Cooper need? Read answer
    • Mini 2010-2016 - Where is the inflation kit located on the Mini Countryman? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos