Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure of the Mini Countryman?

Model: Mini Mini F60, Countryman2 - Years 2017-2023
Part:

In today's video, we will see how to reset the RDC system (which is related to tire pressure control) in the Mini. F55, F56, F57, and F60 are the four versions of the British car on which this operation is performed in the same way. First, let's get into the car and turn on the instrument panel. Now, let's move to the central display and select the "my Mini" option. Then, go to vehicle status and then to tire settings. Confirm and the car will reset the required parameter. At this point, the car will store the new parameter.

Posted on 20 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Mini Countryman
How to reset the tire pressure warning light on the Mini Countryman
Mini (2010-2016 / R60, Countryman1) The activation of the TPMS light indicates a possible puncture or pressure loss from one or more tires; in this guide we will see how to reset the ti…
How to reset the tire pressure light on the Mini Countryman?
How to reset the tire pressure light on the Mini Countryman?
Mini (2017-2023 / F60, Countryman2) In this tutorial, we can see how to reset the tire pressure warning light in the Mini Countryman, a very simple and quick operation, to be done only …
How to reset the tire pressure sensor of the 2015 Mini Countryman
How to reset the tire pressure sensor of the 2015 Mini Countryman
Mini (2010-2016 / R60, Countryman1) If the orange tire pressure warning light on the instrument panel of your 2015 Mini Countryman continues to stay on, it means that the control unit h…

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos