Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the brake pad warning on the Mini Countryman.

Model: Mini Mini Countryman2, F60 - Years 2017-2023
Part: Warning light – error code

This short guide will show us how to reset the brake pad warning on the Mini Countryman, following the instructions below. First, we get into the car and start the ignition; then we press the button located on the instrument panel display to access the menu settings, scrolling through the options until we reach the one for brake pad replacement warning, as shown in the video. At this point, we hold down the button to confirm and reset the brake pad warning light!

Posted on 22 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the brake pads warning light in the Mini Countryman?
How to remove the brake pads warning light in the Mini Countryman?
Mini (2017-2023 / Countryman2, F60) In this tutorial we can see how to remove the brake pads warning light in the Mini Countryman, a very simple and quick operation, to be carried out o…
How to reset the brake pad wear indicator light on the Mini Cooper.
How to reset the brake pad wear indicator light on the Mini Cooper.
Mini (2007-2014 / R57, R55, R56) Today we will see the steps that will allow us to reset the brake pad warning light on the Mini Cooper. First of all, we get on board the car and tur…
Replacement of the rear brake pads on the Mini Countryman.
Replacement of the rear brake pads on the Mini Countryman.
Mini (2010-2016 / R60, Countryman1) Briefly, we will see the step-by-step instructions for disassembling and replacing the rear brake pads of the Mini Countryman, in simple steps. First…

Removing the Door Panel on a BMW Z3

Remove the front left door panel on a BMW Z3. Use a screwdriver to remove the trim around the upper door handle. Take out the switch panel from the door panel (disconnect the connector), unscrew the remaining screws on the door panel, and detach the retaining clips. Finally, pull the panel away by hand and disconnect it from the door (disconnect the power wiring and the opening cable if present on the model). Perform the desired maintenance inside the door. Refit the panel after maintenance.

Watch the video!


by ScegliAuto

More videos