Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Window Regulator on the Mini Cooper?

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Warning light – error code

To reset the window regulator on the Mini Cooper, turn on the instrument panel by inserting the ignition key into the corresponding ignition switch: once this is on, close the door and press the button to raise the window, holding it down even after it has been fully raised. After a few seconds, you can release the button and lower the window completely: this will reset the window regulator, and you can then turn off the instrument panel.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the window lift of the Mini Cooper?
How do you reset the window lift of the Mini Cooper?
Mini (2007-2014 / R56, R55, R57) The reset operation of the power windows on the Mini Cooper can be performed by turning on the instrument panel, inserting the ignition key into the …
How to reset the tire pressure sensor of the Mini Cooper R52
How to reset the tire pressure sensor of the Mini Cooper R52
Mini (2001-2007 / R53, R52, R50) If the tire pressure warning light on your Mini Cooper R52 continues to stay on constantly on the instrument panel and you want to manually reset it,…
Dismantling the Rear Wiper Motor on a Mini Cooper R53
Dismantling the Rear Wiper Motor on a Mini Cooper R53
Mini (2001-2007 / R53, R52, R50) Today, you will see the instructions on how to dismantle the rear wiper motor of a Mini Cooper R53. First, remove the rear wiper by taking off the pl…

    Frequently Asked Questions

    • Mini 2014-2023 - What does the warning light with an exclamation mark inside a triangle indicate in the Mini Cooper? Read answer
    • Mini 2010-2016 - How do you reset the brake wear warning light on the Mini Countryman? Read answer
    • Mini 2001-2007 - What is the meaning of the warning lights on a Mini Cooper? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos